(Araucaria) Cabo CW

[josé maria berezoski]

Edimilson, a Signalink USB, faz CW no modo quebra-galhos, usando a linha de PTT. Veja este texto do próprio site:How do I operate "direct keyed" CW with the SignaLink - This is done by simply connecting the SignaLink's PTT and Ground lines to the "Key" and "Ground" lines of your radio's Key jack.  One of our un-terminated radio cables can be used to make these connections.  You will need to attach the appropriate plug for your radio's Key jack to this cable.  Using our SLCABNC cable, we suggest attaching the white/orange wire to the tip of the plug, and the orange wire to the plug's body/sleeve.  You will then need to install the SignaLink jumpers as follows; PTT to 1, and G (ground) to 2.  Note that direct keyed CW is limited to about 25 WPM on Transmit (there is no limit on Receive), so if you need to transmit faster than this, you'll want to run AFSK CW. Este texto está em:http://www.tigertronics.com/slusbts.htm#How do I operate "direct keyed" CW with the SignaLink  Só transmite a no máximo 25 palavras por minuto, porque a linha de ptt usa um relé para fazer a comutação.Para mais velocidade, precisa fazer uma modificação. 73 PY5XH 		 	   		  
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: <http://list.araucariadx.com/pipermail/araucaria/attachments/20130812/2181e653/attachment.html>