(Araucaria) Logger32 - Nova Versão Liberada

[PT7ZZ, Andre]

Olá,

Os usuários do Logger32 já podem baixar a nova versão do programa ( Ver
3.8.0 ), liberada hoje.

http://www.logger32.net/program.html

Os arquivos de linguagem anteriores não funcionaram na nova versão, apenas a
versão na lingua Inglesa existe para esta nova, quem se interessar em
traduzir,  os arquivos estão disponíveis em
http://logger32.obriensweb.com/zipped/language380.zip .

O software teve um upgrade interessantes, inclusive no tamanho ....

Abaixo as alterações efetuadas:

Note:- There have been menu changes. Language DLLs complied for version
3.7 will no longer load/work.

1) Cleared a minor bug that only manifested itself immediately following a
change of local QTH lat/long using a grid square as the basis of/for
calculation.

2) The DX activity window has been made a little larger to allow for the use
of bigger fonts. If there is white space to the right of the main table
then simply expand one or more of the columns to make the whole table fit
the window.

3) Modifications made to the Alpha Spid support software.

4) A new message to external programs has been added. Message 104 advises
the external application that a DX Spot has been added to the DX Spot Window
and the clipboard has been populated as follows:
<APP_LOGGER32_DXSPOT_CALLSIGN

:4>K4CY <APP_LOGGER32_DXSPOT_FREQ:7>50125.0
<APP_LOGGER32_DXSPOT_BAND:2>6M <APP_LOGGER32_DXSPOT_MODE:3>SSB. The BAND
and MODE fields are derived from the BandPlan.

5) When setting up the User fields in the log input window only those
fields contained in the pull down list may be used. Originally it was
possible to type a field name into the pane leaving the user to believe that
he/she had set it.

6) Bug cleared which prevented the display of information in the upper
status bar under specific conditions

7) A suggestion was received to make the Software CW keying abort (Esc)
terminate immediately rather than at the end of the current letter. See new
option (when configured to use software generated CW) under the menu item
CONFIG | KEYER SETUP.

8) The ADIF fields FREQ_RX and TEN_TEN have been added to the list of fields
that can be imported from the external interface.

9) An additional two Band Map Windows have been added to allow the user to
monitor activity on a band other than the one currently being used (for
example: a permanent activity monitor for 6M regardless of what/where the
operator is doing). The user can click on a DX Spot on the Monitor Band Map
and the Radio (if connected) and logbook will QSY to the frequency/mode.
The Monitor Band Maps will switch to the band the radio was on (before the
QSY).

10) Fixed the lack of action of the $bookmark$ macro in the Sound Card and
the Data Terminal Windows.

11) The DVK has been further enhanced to allow for the triggering of the
built in DVK memories in the FT2000 and 9000. As part of this addition the
setting up menus have been changed round to make them more logical.

12) Added an auto launch option for utility programs. Click TOOLS | UTILITY
PROGRAM SETUP Simply click the checkbox to set any/all utilities to
autostart when Logger32 starts. Also, see the utilities menus for a quick
check of those set to autostart (look for the checkmark alongside the menu).

13) The button that was previously used for on-line 'GoList' lookup now
invokes a generic on-line query. The user programs his/her URL, and waits to
receive an ADIF formatted reply. As a sample, the software defaults to a
query of the Swedish National Amateur Radio database. Golist lookups still
work as before. The Golist (with database on your PC) still works by
clicking the Golist toolbar button. Golist internet lookups are still
functional by clicking the Web Lookup menu on the Golist Lookup Window.

14) An additional "Clear callsign on QSY" option has been introduced into
the Log input window menu setup. With the option selected if you put a
callsign in the call field and then tune away more than about 1 KHz, then
the callsign is removed from the logging entry field. The user can redefine
this figure in the Logger32 INI file.

In addition to the above, Aki - JA1NLX has developed an add on utility for
Logger32 called CheckCall which will only run with Logger32 version 3.8.0
and later. This will be distributed separately. The utility allows the
user to develop his/her own lookup table and for information in that table
to be displayed on entering a callsign in the normal way. (currently I'm
using it to look up 10-10 numbers and those who use LotW..)


-- 
73 de PT7ZZ, Andre

Andre Luiz Coelho Santos .' .
ForDX - Fortaleza DX Group
http://pt7zz.fordx.org
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://list.araucariadx.com/pipermail/araucaria/attachments/20080121/7d69135f/attachment.html